DISASSEMBLY INTO SUBASSEMBLIES (Contd)
1. Turbine Shaft and Overdrive
Carrier Assembly Removal
Lift turbine shaft. (1) and remove overrun clutch housing assembly (10) from transmission case (7).
Correct torque for installed fourth clutch bolt should be
133 lb-in. (15 N-m). If not tightened to minimum torque, check case
for cracks and damaged threads. Replace case if damaged.
Check fourth clutch bolt (12) torque for a minimum of 133 lb-in. (15 N=m).
Remove bolt (12) from fourth clutch housing (11) with torx adapter. Discard bolt (12).
Remove fourth clutch housing (11).