TM 9-2320-387-24-2
26-3.
9,000
LB WINCH
REPAIR (Contd)
23.
24.
25.
26.
Install plate (211, anchor (221, and three tie rods (241 on drum supports (2) and (19) with six
capscrews (20). Tighten capscrews (20) to 18 lb-R (24 N-m).
Install two springs (23) on anchors (22) and plate (21).
NOTE
If motor or control have been precoated with sealing compound,
remove compound from between motor case and control
mounting gear contact area. Failure to do so may cause
improper grounding of control.
Install clamp (27) on motor (13).
Install control pack (26) on motor (13) and tighten clamp (27).
26-9