TM 9-2320-362-14&P
4-9. INDICATOR LIGHT AND WIRE ASSEMBLIES REPAIR (Contd)
1.
2.
3.
4.
5.
6.
7.
8.
9.
Solder wire assembly leads (13) and/or (12) to back of
indicator light (3).
Install indicator light (3) into power interface box (4) and secure
with internal tooth washer (5) and nut (6).
Install incandescent lamp (2) and light lens (1).
Place wire assembly lead (13) onto bus bar (10) and terminal
11E5 (26) and secure with washer (14), lockwasher (15), and
nut (16).
Install circuit breaker (20) into power interface box (4).
Install boot (29) and guard (28) onto power interface box (4) and
secure with four washers (30), lockwashers (31), and screws (32).
Secure bus bar (24) to terminal 11E4 (27) with washer (17),
lockwasher (18), and nut (19).
Secure wire assembly lead (12), bus bar (25), and bus bar (21)
with washers (22), screw (11), and nut (23).
Install gasket (7) and cover (8) on power interface box (4) and
secure with sixteen screws (9).
4-10