TM 9-2320-280-20-3
12-140. REAR ANTENNA CABLES REPLACEMENT (Contd)
10.
11.
12.
13.
14.
15.
Remove five screws (7), clamps (3), and two antenna cables (1) from underbody (2).
Remove locknut (5), washer (4), capscrew (9), washer (4), and filler pipe clamp (8) from
underbody (2) and tiller pipe (6). Discard locknut (5).
NOTE
Perform steps 12 through 15 for M966, M966A1, M1025, M1025A1,
M1025A2, M1026, M1026A1, M1043, M1043A1, M1043A2, M1044,
M1044A1, M1045, M1045A1, M1045A2, M1046, and M1046A1
models only.
Remove two locknuts (10), screws (12), clamps (11), and antenna cables (1) from wheelhouse (13).
Discard locknuts (10).
Remove two nut and lockwasher assemblies (18), capscrews (15), two antenna cables (1), grommet
(17), and retainer (16) from wheelhouse (13). Discard nut and lockwasher assemblies (18).
Disconnect two antenna cables (1) from antenna base (14) and remove antenna cables (1).
Remove ten clamps (3) and two clamps (11) from antenna cables (1).
12-216