11-76 Change 1
All models except M996, M996A1,
M997, M997A1, M997A2, M998, M998A1,
M1035, M1035A1, M1035A2, M1037,
M1038, M1038A1, M1042, M1097,
M1097A1, M1097A2, M1123
General mechanics tool kit:
automotive (Appendix B, Item 1)
Four locknuts (Appendix G, Item 76)
11-55. TURRET HANDLE REPLACEMENT
This task covers:
Remove four locknuts (4), washers (2), capscrews (1), washers (2), and turret handle (3) from weapon
station tray (5). Discard locknuts (4).
Install turret handle (3) on weapon station tray (5) with four washers (2), capscrews (1), washers (2),
and locknuts (4).
Fabrication instructions are available to replace the turret
handle. Refer to appendix D (fig. D-95).
The following procedure is for replacement of turret handle that
has been previously removed and installed in accordance with
the fabrication instructions.