TM 9-2320-280-20-2
5-2. TRANSMISSION SERVICE (Contd)
NOTE
Perform steps 5 through 9 for 3L80 transmissions only.
5. Insert end of suction tube (3) marked filter into oil filter (5).
6. Install O-ring seal (7) onto upper end of suction tube (3) marked case and slide downward.
7. Position oil filter (5) on transmission (1) inserting suction tube (3) into oil input port (2).
8. Install oil filter (5) and spacer (4) on transmission (1) with capscrew (6). Tighten capscrew (6) to 10-
15 lb-ft (14-20 Nm).
9. Install gasket (8) and oil pan (9) on transmission (1) with thirteen capscrews (10). Tighten capscrews (10)
to 12 lb-ft (16 Nm).
5-6