3-73. SURGE TANK-TO-LOWER RADIATOR TUBE HOSE REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
1.
Loosen two clamps (2) and remove hose (3) from surge tank (1) and tube assembly (4).
2.
Remove two clamps (2) from hose (3).
INITIAL SETUP:
Tools
General mechanics tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-280-24P
Equipment Condition
Cooling system drained (para. 3-60).
b. Installation
1.
Install two clamps (2) on hose (3).
2.
Install hose (3) on surge tank (1) and tube assembly (4) with two clamps (2).
3.
Tighten clamps (2) to 40 lb-in. (5 Nm).
TM 9-2320-280-20-2
3-128
Change 2
FOLLOW-ON TASK: Fill cooling system (para. 3-60).
NOTE
If the vehicle is equipped with surge tank (12340061) and surge
tank-to-lower-radiator tube hose (12339163) is received, cut
approximately four inches from surge tank end of hose prior
to installation.