Table 2-1. Unit Level Preventive Maintenance Checks and Services HMMWV (Cont'd)
ITEM
NO.
INTERVAL
ITEM TO BE
INSPECTED
PROCEDURES
10
Semi-
Suspension
d. Inspect control arms, control arm
d. Control arm bent,
Annual
and Steering bushings, springs, shock absorbers,
bushing worn or obvious
System
and bracket for damage.
damage that would
(Cont'd)
hinder operation.
e. Inspect steering column U-joints,
e. U-joints, tie rods,
tie rods or radius rods, pitman arm,
pitman arm or idler arm
center link, and idler arm for breaks,
are worn or cracked.
cracks, and wear.
e.1. Inspect steering column for
e.1. Steering column
security of mounting hardware.
is not secure.
f. Inspect steering gear for mounting
f. Any mounting bolt
security. Tighten mounting bolts to
missing or unserviceable.
60 lb-ft (81 Nm).
TM 9-2320-280-20-1
Change 1
2-11
NOT FULLY MISSION
CAPABLE IF:
NOTE
Do not lubricate shock absorber
bushings, radius rod bushings,
stabilizer bar bushing, or suspension
arm pivot bushing.