3-20. POWER STEERING FLUID SERVICING
Raise and secure hood (para. 3-8).
Do not permit dirt, dust, or grit to enter power steering reservoir. Damage to power steering system will result if
power steering fluid becomes contaminated.
Pull out cap/dipstick (5) and check steering fluid level. If engine is warm, level should be between
"HOT and COLD marks. If engine is cool, level should be between ADD" and COLD" marks. In either
condition, fluid must be added if level reads below "ADD mark.
Do not overfill power steering reservoir. Damage to power steering system will result.
If fluid level is low, add fluid (appendix G) to power steering reservoir (4) and wipe away any fluid
Install cap/dipstick (5).
Lower and secure hood (para. 3-8).